☎ +33 9 70 75 50 24|contact@michaud-export.com
FacebookYouTubeLinkedIn
OUR CATALOGUES

  • Bare lug

    1,00€
    The tubular lug is designed to connect cable. It is made of tinplated copper (by electrolysis). It is manufactured with an inspection hole and socketing. It is implemented with hexagonal compressed connection. It allows copper and aluminium conductors. This lug meets the requirement of the NFC 20-130 standard. The friction welded lug is used to connect aluminium bare conductors to copper equipment terminals. It is used for industrial or indoor applications. This lug is implemented by crimping and out of traction. This lug meets the requirement of the NF C 63-061 standard. The Al/Cu tinned aluminium lug is used to connect aluminium bare conductors to copper equipment terminals. It is applied with a deep crimping.
    Select options Details

  • AMM concentrator data supply kit

    1,00€
    This kit is designed for the installation of an AMM (Automatic Meter Management) data concentrator in a LV/MV transformer or on a pole depending on the type of network (underground or overhead). These products supply and protect the concentrator.
    Select options Details

  • Aluminium earth cable and accessory

    1,00€
    The earth distributor is used to connect floor earths between themselves. It is installed in a building pillar according to applicable specifications. The ground cutting blade is installed at the bottom of the earth pillar. It enables the earth system opening during an earth resistance measurement.
    Details

  • Aerial sub-surface connection for LV network (NJAS)

    1,00€
    Aerial sub-surface junction is designed to establish the connection from an underground network to a low voltage overhead network. They are implemented on overhead environment along a pole, under a mechanical protection as a conduit.
    Select options Details

  • Aerial single pole star connection block

    1,00€
    This unipolar aerial pole allows to star one conductor into 8 outlets. The use of the 2 unipolar blocks enables to realize up to 8 singlephase connections. This bloc has a plate number to easily identify the conductor. The box can be installed on a facade or a pole.
    Select options Details

  • Aerial service cable

    1,00€
    This single phase or three-phase aerial cable is used for the connection between the low voltage network and the home. It is perfectly suitable for electrification applications in rural and suburban areas thanks to its optimized 6mm² section. It is stretched to a maximum range of 40m.
    Select options Details

  • Aerial distribution box 8 services and 1 network

    1,00€
    The 8 service distribution box allows the junction of 2 aerial networks and the derivation of 8 single phase or 4 three phases connections maximum. This box can be fixed either on a facade or on a pole. It can be used as an accessory for network shutdown.
    Select options Details

  • Aerial distribution box 3 services or 7 services and 1 network

    1,00€
    The box with 3 outlets is designed to establish up to 6 single phase connections or up to 3 three phase connections at one point of the low voltage aerial bundled network. The box with 7 outlets is designed to establish the junction of 2 overhead networks and the tap contact of 6 single phase or three phase connections maximum. These boxes can be installed on a façade or a pole. They can also be used at the network end.
    Select options Details

  • Accessories for fraud preventing aerial cable

    1,00€
    The cutout sleeve makes it possible to secure the connection of the phase conductor and to protect the installation against electrical faults that may occur during illegal connections on the concentric cable. This cutout sleeve can receive a 22×58 fuse up to 100A or a neutral tube. The fraud preventing connector is used to make a tap connection between aerial networks. Once implemented, this connector cannot be dismantled. The accessories allow the anchoring of the concentric cable, both at the top of the pole and at the bottom of the meter. The U508 anchoring clamp accepts single and three-phase cables, while the K310 accepts only single-phase cables.
    Select options Details
Go to Top