Cable saddle and cable tie
This cable saddle is used for fixing the low voltage A.B.C. (Aerial Bundled Conductors)
on façades using neutral messenger or fully supported technology.
A cable saddle is implemented every 30cm to ensure excellent fixing of the A.B.C.
The wall mounting is quick and easy to implement and is discreet and aesthetic.
- Three types of cable saddles are available:
* BRPF: cable saddle to be fixed on façades by a nail (12mm Ø hole).
* BRPV: cable saddle to be fixed on façades by a screw and dowel pin (12mm Ø hole).
* BRTV: cable saddle to be fixed on façades by a reinforced screw and dowel pin assembly (16mm Ø hole).
- The body and cable tie are made of UV resistant synthetic material.
- The opening under the saddle allows the use of an extra tie (not provided) to install a second conductor.
- The cable tie has outside teeth for:
- Excellent protection of conductor insulation,
- Excellent fixing of conductors:
* Service 2x16 to 4x35mm²,
* Network 4x35 to 4x150mm².
- This connector meets the criteria of NF C 33-040 and EN 50-483.
|K272||CABLE SADDLE - BRPF1||0,040||25|
|K273||CABLE SADDLE - BRPF6||0,060||25|
|F033||CABLE SADDLE - BRPV1||0,070||50|
|F035||CABLE SADDLE - BRPV6||0,080||50|
|F036||CABLE SADDLE - BRTV10||0,175||20|
|F038||CABLE SADDLE - BRTV17||0,240||20|
|F002||CABLE TIE 9x180mm (100 pieces)||0,330||100|
|F003||CABLE TIE 9x260mm (100 pieces)||0,510||100|
|F004||CABLE TIE 9x360mm (100 pieces)||0,625||100|
|F005||CABLE TIE 9x550mm (100 pieces)||1,070||100|
|F006||CABLE TIE 9x760mm (100 pieces)||1,480||100|
|F013||IMPLEMENTATION TOOL FOR TIE||0,330||1|
|F040||WALL TYPE STRAP SUPPORT WITH BRACKET TO STRIKE (box of 100)||0,400||100|
|F041||WALL TYPE STRAP SUPPORT ATTACHED BY SCREW (box of 100)||0,300||100|
|F043||CABLE SADDLE BIC 15/30 WITHOUT CABLE TIE||0,010||100|
|F042||CABLE SADDLE BIC 15/30 + CABLE TIE 9x180mm||0,015||100|
|F039||CABLE SADDLE BIC 30/50||0,070||100|